The air inside your home is often many more times polluted than the air outside.
We offer 3 types of Indoor Air Quality Testing service depending on the nature of problem being experienced.
1. General IAQ Assessment using our trend sensor monitoring equipment.
During our surveys we take snapshot readings of Temperature, Relative Humidity, Formaldehyde, Total Volatile Organic Compounds, PM10, PM2.5, PM1 and NO2. We also inspect and measure the ventilation strategy of the building and advise on likely causes and mitigation. Cost is £150+VAT
2. Microbial swabbings of air and surfaces using our scientific instruments.
Each service comprises up to 10 sample locations. We provide a comprehensive report of the measurements following our analysis. Note air samples take 2-4 days for feedback. Cost of each type (air or surface) is £400+VAT. Please note this service helps to prove the air disinfection effect of our active air purification products and is highly recommended.
3. Comprehensive passive diffusion chemical analysis of airborne VOCs.
Our Home Air Analysis service is a comprehensive test of the air of your home or office of VOCs and mVOCs. We set up a Air Quality Testing Kit in your home and return after 1-2 hours when a large enough air sample has been collected to analyse. We then send it off to our AIHA accredited laboratory partner who carries out the home air analysis. Once the results have been returned to us, we’ll send you a report about your indoor air quality and can return to discuss it with you. The report from our Advanced Air Quality Testing shows exactly what pollutants were in the air we sampled that you and your family were breathing at the time, discusses sources and makes preventative/improvement recommendations.
Basic Analysis – 10 Significant VOCs and EPA Hazardous Air Pollutants – £250+VAT and including Formaldehyde £350+VAT
Comprehensive Analysis – Comprehensive list of all detected VOCs and EPA Hazardous Air Pollutants – £550+VAT and including Formaldehyde £650+VAT